2021 Mustang Radial Skid Steer Loaders 2012

Information

2021 Mustang Radial Skid Steer Loaders 2012

Features may include:

Operator's Cab
  • Restraint bar design is tied into the HydralocTM safety system, assuring operator safety by preventing engine start-up when the operator is not in the seat with the restraint bar in place.li>
  • with the sturdy Level II-certified ROPS/ FOPS structure. Operators also enjoy an unobstructed, panoramic view to the attachment and surrounding work areas.
Controls
  • With ultraresponsive T-bar hands-only
Engine
  • Yanmar Tier IV 3-cylinder naturally aspirated engine provides the power you need.
  • After treatment meets all Tier IV requirements through proven technology.
Hydraulics
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
Liftarm
  • A high-strength, low-profile design maximizes operator visibility for added performance and safety.
Serviceability
  • Level II FOPS with a robust operator stations design provides added protection for the operator.

Photos

Highlights

  • Vermilion, Alberta
  • 2021
  • Mustang
  • Radial Skid Steer Loaders 2012
  • Available
  • Bucket: 36" (914 mm)
  • to Hinge Pin - Fully Raised: 96" (2438 mm) | Dump Reach at Full Height: 14.8" (376 mm) | Rollback at Full Height: 100° | Dump Height: 72.3" (1836 mm)

Specifications

  • 2021
  • Mustang
  • Radial Skid Steer Loaders
  • 2012
  • General
  • Yanmar 3TNV82 Intermin Tier IV
  • Net Power (kW) @ 2400 rpm: 24 hp (17.9)
  • @ 1200 rpm: 68 ft.-lbs. (86)
  • 81 cu.in. (1.3)
  • 5.70 x 12
  • 5.70 x 12
  • Battery (CCA): 12-volt (950)
  • 12-volt (1.7 kW)
  • 40-amp
  • Travel Speed - Maximum: 5.5 mph (8.9 km/hr)
  • Auxiliary Hydraulics: 10.1 gpm (38.2 L/min)
  • Rollback at Ground Level: 22º | Dump Angle: 46º | Clearance Circle - Rear: 60" (1524 mm) | Clearance Circle - Front w/o Bucket: 52" (1321 mm) | Clearance Circle - Front w/Bucket: 87.5" (2223 mm) | Departure Angle: 30º
  • Overall Operating Height - Fully Raised: 124.7" (3167 mm) | to top of ROPS: 74.7" (1897 mm)
  • to Hinge Pin - Fully Raised: 96" (2438 mm) | Dump Reach at Full Height: 14.8" (376 mm) | Rollback at Full Height: 100° | Dump Height: 72.3" (1836 mm)
  • to Chassis: 5.9" (150 mm) | Clearance Circle - Rear: 43.2" (1097 mm) | Clearance Circle - Front w/o Bucket: 32.8" (833 mm) | Clearance Circle - Front w/Bucket: 58" (1473 mm)
  • with 36" Bucket: 101.4" (2576 mm) | without Bucket: 72.3" (1836 mm)
  • 30.5" (775 mm)
  • Less Bucket: 35.8" (909 mm) | Narrow Offset Tire Option: 65.5" (1664 mm)
  • Bucket: 36" (914 mm)
  • Seat to Ground Height: 34.6" (879 mm)
  • Reservoir: 7.2 gal. (27.3 L)
  • Rated Operating Capacity: 850 lbs. (386 kg)
  • Tank: 7.7 gal. (29 L)
  • Approximate: 7960 lbs. (3611 kg)