2021 Mustang Radial Skid Steer Loaders 2012
- Year 2021
- Make Mustang
- Model Radial Skid Steer Loaders
2021 Mustang Radial Skid Steer Loaders 2012
Features may include:
Operator's Cab- Restraint bar design is tied into the HydralocTM safety system, assuring operator safety by preventing engine start-up when the operator is not in the seat with the restraint bar in place.li>
- with the sturdy Level II-certified ROPS/ FOPS structure. Operators also enjoy an unobstructed, panoramic view to the attachment and surrounding work areas.
- With ultraresponsive T-bar hands-only
- Yanmar Tier IV 3-cylinder naturally aspirated engine provides the power you need.
- After treatment meets all Tier IV requirements through proven technology.
- Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
- A high-strength, low-profile design maximizes operator visibility for added performance and safety.
- Level II FOPS with a robust operator stations design provides added protection for the operator.
Engine
Engine Manufacturer
Yanmar 3TNV82 Intermin Tier IV
Engine Power
Net Power (kW) @ 2400 rpm: 24 hp (17.9)
Engine Torque, Maximum
@ 1200 rpm: 68 ft.-lbs. (86)
Displacement
81 cu.in. (1.3)
Wheels & Tires
Tires, Front Specification
5.70 x 12
Tires, Rear Specification
5.70 x 12
Electric
Electrical
Battery (CCA): 12-volt (950)
Starter
12-volt (1.7 kW)
Alternator
40-amp
Operational
Operating Speed
Travel Speed - Maximum: 5.5 mph (8.9 km/hr)
Hydraulics
Hydraulic Flow
Auxiliary Hydraulics: 10.1 gpm (38.2 L/min)
Dimensions
Overall Height
Overall Operating Height - Fully Raised: 124.7" (3167 mm) | to top of ROPS: 74.7" (1897 mm)
Height
to Hinge Pin - Fully Raised: 96" (2438 mm) | Dump Reach at Full Height: 14.8" (376 mm) | Rollback at Full Height: 100° | Dump Height: 72.3" (1836 mm)
Ground Clearance
to Chassis: 5.9" (150 mm) | Clearance Circle - Rear: 43.2" (1097 mm) | Clearance Circle - Front w/o Bucket: 32.8" (833 mm) | Clearance Circle - Front w/Bucket: 58" (1473 mm)
Overall Length
with 36" Bucket: 101.4" (2576 mm) | without Bucket: 72.3" (1836 mm)
Wheelbase
30.5" (775 mm)
Dimensions
Rollback at Ground Level: 22º | Dump Angle: 46º | Clearance Circle - Rear: 60" (1524 mm) | Clearance Circle - Front w/o Bucket: 52" (1321 mm) | Clearance Circle - Front w/Bucket: 87.5" (2223 mm) | Departure Angle: 30º
Overall Width
Less Bucket: 35.8" (909 mm) | Narrow Offset Tire Option: 65.5" (1664 mm)
Width
Bucket: 36" (914 mm)
Seat Height
Seat to Ground Height: 34.6" (879 mm)
Capacities
Hydraulic Capacity
Reservoir: 7.2 gal. (27.3 L)
Features
Rated Operating Capacity: 850 lbs. (386 kg)
Fuel Capacity
Tank: 7.7 gal. (29 L)
Weights
Weight, In Running Order
Approximate: 7960 lbs. (3611 kg)