2021 Mustang Radial Skid Steer Loaders 1050R

Information

2021 Mustang Radial Skid Steer Loaders 1050R

Features may include:

Operator's Cab
  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
Controls
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
Engine
  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.
Hydraulics
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Liftarm
  • 42% more visibility with new low-profile lift arm.
Serviceability
  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS

Photos

Highlights

  • Vermilion, Alberta
  • 2021
  • Mustang
  • Radial Skid Steer Loaders 1050R
  • Available
  • Bucket: 55" (1404 mm)
  • to Hinge Pin - Fully Raised: 107.5" (2731 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump Height: 84.5" (2146 mm)

Specifications

  • 2021
  • Mustang
  • Radial Skid Steer Loaders
  • 1050R
  • General
  • Yanmar 3TNV88C-KMS Tier IV
  • Gross Power (kW) @ 2800 rpm: 34.7 hp (25.5) | Net Power (kW) @ 2800 rpm: 33.1 hp (24.7)
  • @ 1680 rpm: 80 ft.-lbs. (108) | @ 1820 rpm: 80.7 ft.-lbs. (109.4)
  • 100 cu. in. (1.6 L)
  • 27 x 8.5 x 15 HD
  • 27 x 8.5 x 15 HD
  • Battery: 12-volt (950 CCA)
  • 12-volt (3.0 kW)
  • 40-amp
  • Travel Speed - Maximum: 5.9 mph (9.5 km/hr)
  • Auxiliary Hydraulics - Standard: 14.5 gpm (55 L/min)
  • Rollback at Ground Level: 29° | Dump Angle: 42° | Clearance Circle - Rear: 54.1" (1374 mm) | Clearance Circle - Front w/o Bucket: 44.1" (1120 mm) | Clearance Circle - Front w/Bucket: 69.4" (1763 mm) | Departure Angle: 26°
  • Operating - Fully Raised: 139.6" (3546 mm) | to top of ROPS: 70.3" (1786 mm)
  • to Hinge Pin - Fully Raised: 107.5" (2731 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump Height: 84.5" (2146 mm)
  • to Chassis: 6.0" (152 mm)
  • with 55" Bucket: 114" (2896 mm) | Less Bucket: 88.9" (2258 mm)
  • 34.5" (876 mm)
  • Less Bucket: 48.4" (1229 mm)
  • Bucket: 55" (1404 mm)
  • Seat to Ground Height: 32.6" (828 mm)
  • Reservoir: 8 gal. (30.3 L)
  • Rated Operating Capacity: 1,050 lbs. (476 kg)
  • Tank: 10.4 gal. (39.4 L)
  • Approximate: 4,200 lbs. (1,905 kg)