2021 Mustang Radial Skid Steer Loaders 1050R
- Year 2021
- Make Mustang
- Model Radial Skid Steer Loaders
Please note that we may not have these catalogue items in stock
2021 Mustang Radial Skid Steer Loaders 1050R
2021 Mustang Radial Skid Steer Loaders 1050R
Features may include:
Operator's Cab- Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
- A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
- Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
- Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
- Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
- All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
- Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
- Automatic glow plug heating system provides superior cold-weather starting.
- After treatment meets all Tier IV requirements through proven technology.
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
- 42% more visibility with new low-profile lift arm.
- Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
- Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
- Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
- All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
- Removable plate for easy cleanout of foot area inside ROPS/FOPS
Engine
Engine Manufacturer
Yanmar 3TNV88C-KMS Tier IV
Engine Power
Gross Power (kW) @ 2800 rpm: 34.7 hp (25.5) | Net Power (kW) @ 2800 rpm: 33.1 hp (24.7)
Engine Torque, Maximum
@ 1680 rpm: 80 ft.-lbs. (108) | @ 1820 rpm: 80.7 ft.-lbs. (109.4)
Displacement
100 cu. in. (1.6 L)
Wheels & Tires
Tires, Front Specification
27 x 8.5 x 15 HD
Tires, Rear Specification
27 x 8.5 x 15 HD
Electric
Electrical
Battery: 12-volt (950 CCA)
Starter
12-volt (3.0 kW)
Alternator
40-amp
Operational
Operating Speed
Travel Speed - Maximum: 5.9 mph (9.5 km/hr)
Hydraulics
Hydraulic Flow
Auxiliary Hydraulics - Standard: 14.5 gpm (55 L/min)
Dimensions
Overall Height
Operating - Fully Raised: 139.6" (3546 mm) | to top of ROPS: 70.3" (1786 mm)
Height
to Hinge Pin - Fully Raised: 107.5" (2731 mm) | Dump Reach at Full Height: 22.8" (579 mm) | Rollback at Full Height: 99° | Dump Height: 84.5" (2146 mm)
Ground Clearance
to Chassis: 6.0" (152 mm)
Overall Length
with 55" Bucket: 114" (2896 mm) | Less Bucket: 88.9" (2258 mm)
Wheelbase
34.5" (876 mm)
Dimensions
Rollback at Ground Level: 29° | Dump Angle: 42° | Clearance Circle - Rear: 54.1" (1374 mm) | Clearance Circle - Front w/o Bucket: 44.1" (1120 mm) | Clearance Circle - Front w/Bucket: 69.4" (1763 mm) | Departure Angle: 26°
Overall Width
Less Bucket: 48.4" (1229 mm)
Width
Bucket: 55" (1404 mm)
Seat Height
Seat to Ground Height: 32.6" (828 mm)
Capacities
Hydraulic Capacity
Reservoir: 8 gal. (30.3 L)
Features
Rated Operating Capacity: 1,050 lbs. (476 kg)
Fuel Capacity
Tank: 10.4 gal. (39.4 L)
Weights
Weight, In Running Order
Approximate: 4,200 lbs. (1,905 kg)