2021 Mustang Track Loaders 3200VT

Swipe to View More

  • Year 2021
  • Make Mustang
  • Model Track Loaders
  • Engine TD 3.6 EPA Final

Please note that we may not have these catalogue items in stock

2021 Mustang Track Loaders 3200VT

2021 Mustang Track Loaders 3200VT

2021 Mustang Track Loaders 3200VT

Features may include:

Performance
  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Operator's Cab
  • Pilot controls that have the controls mounted to the seat were they move with the operator.
  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
Controls
  • Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
Engine
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.
Hydraulics
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Powerful drive motors deliver superior pushing power to the tracks.
  • Internal drive motor plumbing protects hoses, tubes and fittings from damage resulting from debris or objects in the track area.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Lift Arm
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Serviceability
  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.

Engine

Engine Manufacturer Deutz
Engine TD 3.6 EPA Final
Engine Type 4-StrokeTurbo
Engine Power Net @ 2500 rpm: 108 hp (80.8 kW)
Engine Torque Peak @ 1600 rpm: 339 ft-lbs. (430 Nm)
Displacement 221 cu.in. (3.6 l)
Emissions Tier IV
Cylinder Liners 4

Drivetrain

Transmission Axial Piston

Electric

Alternator Voltage/Amperage: 14V/95A

Operational

Operating Conditions Bucket Breakout - Tilt Cylinder: 9901 lbs. (4492 kg) | Bucket Breakout - Lift Cylinder: 7491 lbs. (3398 kg) | Dump Angle - Fully Raised: 41° | Pull / Tractive Effort: 12,770 lbs. (5792 kN)
Operating Speed Ground Speed - Single Speed: 5.3 mph (8.6 km/hr) | Ground Speed - Two Speed: 7.8 mph (12.6 km/hr)
Ground Pressure 5.3 psi (0.37 bar)

Hydraulics

Hydraulic Flow Auxiliary: 27 gpm (102.2 l/min) | High-Flow: 37.4 gpm (141.6 l/min)

Dimensions

Overall Height Operating - Fully Raised: 169" (4293 mm) | Height at ROPS: 83.1" (2111 mm)
Dimensions Reach - Fully Raised: 40.4" (1026 mm) | Carry Position: 7.8" (199 mm) | Track Gauge: 51.7" (1313 mm) | Crawler Base: 61.8" (1570 mm)
Overall Length With Bucket - Standard Counterweight: 159.8" (4059 mm) | Without Bucket - Standard Counterweight: 127.7" (3243 mm)
Overall Width Less Bucket: 69.5" (1766 mm)
Height To Hinge Pin - Fully Raised: 130" (3302 mm) | Dump - Fully Raised: 99.6" (2530 mm) | Specified: 76.3" (3243 mm)
Width Bucket: 83.9" (2131 mm)
Ground Clearance 12.2" (309 mm)
Track Width 17.7" (450 mm)

Capacities

Cargo Capacity At 35% of Tipping Load: 3200 lbs. (1452 kg) | At 50% of Tipping Load: 4571 lbs. (2074 kg) | Tipping Load: 9143 lbs. (4148 kg)
Hydraulic Capacity Reservoir Tank: 16.5 gal. (62.5 l)
Fuel Capacity Tank: 32.5 gal. (123 l)
Oil capacity Pump: 9 qts. (8.5 l)
Cooling System 5.1 gal. (19.3 l)

Weights

Weight, In Running Order 11610 lbs. (5267 kg)

Features

Features Roller Type: Steel
Track Type Rubber | Rollers: 4

Product Photography