2021 Mustang Radial Skid Steer Loaders 1350R NXT2

Information

2021 Mustang Radial Skid Steer Loaders 1350R NXT2

Features may include:

Operator's Cab
  • Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
  • A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
  • Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
  • Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
Controls
  • Digital color display shows real time fuel consumption, engine RPM's, machine hours, engine diagnostic codes, warning indicators and much more.
  • All instrumentation is conveniently located in the upper-right and left instrument panels for easy access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.
Engine
  • Automatic glow plug heating system provides superior cold-weather starting.
  • After treatment meets all Tier IV requirements through proven technology.
Hydraulics
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Liftarm
  • 42% more visibility with new low-profile lift arm.
Serviceability
  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Swing-out rear door easily opens on hinges, allowing full access to filters and fluid reservoirs, for servicing and maintenance.
  • All-new swing-out cooler provides improved access to the engine bay area.
  • Entire ROPS/FOPS assembly tilts rearward with a gas-spring assist for easy internal access to the pumps, hydraulic valve bank and drive motors.
  • All-new cab safety restraint & pull cord safely holds ROPS/FOPS in raised position.
  • Removable plate for easy cleanout of foot area inside ROPS/FOPS

Photos

Highlights

  • Vermilion, Alberta
  • 2021
  • Mustang
  • Radial Skid Steer Loaders 1350R NXT2
  • Available
  • Bucket: 54" (1372 mm)
  • to Hinge Pin - Fully Raised: 110" (2790 mm) | Dump Reach at Full Height: 23.3" (591 mm) | Rollback at Full Height: 98° | Dump Height: 83.6" (2120 mm)

Specifications

  • 2021
  • Mustang
  • Radial Skid Steer Loaders
  • 1350R NXT2
  • General
  • Yanmar 4TNV88C-KMS
  • Gross Power (kW) @ 2800 rpm: 46.6 hp (34.3) | Net Power (kW) @ 2800 rpm: 44.5 hp (33.2)
  • @ 1820 rpm: 108 ft.-lbs. (146.2)
  • 133.6 cu. in. (2.19 L)
  • 10.00 x 16.5 HD
  • 10.00 x 16.5 HD
  • Battery: 12-volt (800 CCA)
  • 12-volt (2.3 kW)
  • 100-amp
  • Travel Speed - Maximum: 8.0 mph (12.9 km/hr)
  • Auxiliary Hydraulics - Standard: 18.5 gpm (70 L/min)
  • Rollback at Ground Level: 29° | Dump Angle: 40° | Clearance Circle - Rear: 54" (1372 mm) | Clearance Circle - Front w/o Bucket: 44.1" (1120 mm) | Clearance Circle - Front w/Bucket: 72.5" (1842 mm) | Departure Angle: 25°
  • Operating - Fully Raised: 143.8" (3546 mm) | to top of ROPS: 76" (1930 mm)
  • to Hinge Pin - Fully Raised: 110" (2790 mm) | Dump Reach at Full Height: 23.3" (591 mm) | Rollback at Full Height: 98° | Dump Height: 83.6" (2120 mm)
  • to Chassis: 7.9" (201 mm)
  • with 54" Bucket: 120" (3048 mm) | Less Bucket: 53.7" (1364 mm)
  • 37.4" (950 mm)
  • Less Bucket: 53.7" (1364 mm)
  • Bucket: 54" (1372 mm)
  • Seat to Ground Height: 33.3" (846 mm)
  • Reservoir: 9.2 gal. (34.8 L)
  • Rated Operating Capacity: 1,350 lbs. (612 kg)
  • Tank: 15.7 gal. (59.4 L)
  • Approximate: 5,130 lbs. (2327 kg)